![](https://dunloptrade.com/wp-content/uploads/2021/02/website-buckets-19TRANS.png)
Tile-On-Wood
Ready mixed all-in-one adhesive and grout for floors
- HIGH BOND STRENGTH
- EASY TO USE
- WATER RESISTANT
- FOR FLOORS
DUNLOP TILE-ON-WOOD is a high strength, water resistant, ready mixed floor tile adhesive and grout. It is suitable for use on moisture stable timber based boards such as moisture resistant plywood and tongue and grooved timber. Not suitable for fully vitrified or porcelain tiles.
Grey – 15kg
Sandstone – 15kg
1kg of DUNLOP TILE-ON-WOOD fixes approximately 0.2m2 of tiles. Grout coverage varies according to tile size and joint width, as a guide DUNLOP TILE-ON-WOOD is sufficient to grout approximately 0.3kg per m2 when using 300mm x 300mm x 9mm tiles with 3mm joints, or at approximately 1.93kg per m2 when using 20mm x 20mm x 5mm tiles with 3mm joints.
Customer Testimonial
I switched to Dunlop after being let down by another supplier. Very pleasantly surprised with the results! Will definitely use Dunlop products in the future!
Andy W
Datasheets
Technical Data Sheet Material Safety Data SheetDeclaration of Performances
UK Declaration of Performance EU Declaration of PerformanceFind a stockist
Get in touch
Our experts are on hand to answer your every question. We're here from 9am-5pm, Monday to Friday.
ContactNot sure which products you need or how much?
Use our Job Build tool to see if this product is right for the job, and how much of it you might need.
Start a job![](https://dunloptrade.com/wp-content/themes/dunlopadhesives/images/panel-job-build.png)