CX-03 Fast Set Tile Adhesive is specifically designed for contractors and DIY enthusiasts who require a fast and reliable tiling solution. With a fast setting time of just 3 hours, this adhesive is perfect for projects with tight deadlines or areas that need to be reopened quickly. It offers flexible application with a 45 minute pot life, giving you plenty of time to work whilst still providing a fast solution. The adhesive is particularly valuable for interior and limited exterior applications, providing a strong, water-resistant bond that can meet the challenges of different tiling environments.

The CX-03 is compatible with a wide range of interior surfaces, including:

• Concrete
• Cement-sand screeds
• Plaster (minimum 4 weeks old)
• Plasterboard (With Dunlop flexible Additive)
• Existing unglazed tiles (With Dunlop flexible Additive)
• Fibre-reinforced cement boards (With Dunlop flexible Additive)
• Tile backer boards (With Dunlop flexible Additive)

Important considerations:

• Ensure surfaces are clean, dry, and free from contaminants
• Use Dunlop Flexible Additive for existing glazed tiles or vinyl tiles
• Check that the background is sound and stable
• Verify plasterboard weight limits (maximum 32kg per square meter)

Surface preparation is critical for a successful tiling project. Follow these key steps:

• Thoroughly clean the surface
• Ensure the area is completely dry
• Remove dust, grease, or loose materials
• Check for and repair any uneven areas or damages
• For porous surfaces, apply Dunlop Multi-Purpose Primer:
  • Dilute 1:1 with water
  • Improve adhesion
  • Ensure even coverage
• For plaster backgrounds, apply two neat coats of Dunlop Multi Purpose Primer

Additional preparation tips:

• Work within a temperature range of 5°C to 25°C
• Avoid tiling in damp conditions
• Verify surface levelness
• Properly prime to ensure the best possible bond

Coverage for the CX-03 Fast Set Tile Adhesive varies depending on the surface: approximately 2kg per square meter for dry wall areas and 3.5kg per square meter for floors, exterior, and wet areas. The recommended bed thickness is 3-6mm, with the option to use up to 12mm in limited areas. After applying the adhesive, you can grout after just 3 hours, making it an excellent choice for time-sensitive projects. Always add an extra 10% to your calculated quantity to account for cuts and waste. The quick setting time means you can complete your tiling project much faster compared to standard adhesives, with tiles ready for grouting in just a few hours.