The Dunlop CX-24 Essential Tile Adhesive is an excellent solution for standard tiling projects, classified as a C1T adhesive with reduced slip characteristics. It features an extended open time of 15-20 minutes, giving contractors a more forgiving working window compared to faster setting adhesives.
With a generous 5 hour pot life, this adhesive offers exceptional flexibility for multi-stage projects or those requiring more precise tile placement. Unlike quick-setting adhesives, CX-24 allows for a more relaxed installation process while maintaining a reliable bond for interior wall and floor applications.

The CX-24 is compatible with a wide range of interior surfaces, including:

• Concrete
• Cement-sand screeds
• Plaster (minimum 4 weeks old)
• Plasterboard (With Dunlop flexible Additive)
• Existing unglazed tiles (With Dunlop flexible Additive)
• Fibre-reinforced cement boards (With Dunlop flexible Additive)
• Tile backer boards (With Dunlop flexible Additive)

Important considerations:

• Ensure surfaces are clean, dry, and free from contaminants
• Use Dunlop Flexible Additive for existing glazed tiles or vinyl tiles
• Check that the background is sound and stable
• Verify plasterboard weight limits (maximum 32kg per square meter)

Surface preparation is critical for a successful tiling project. Follow these key steps:

• Thoroughly clean the surface
• Ensure the area is completely dry
• Remove dust, grease, or loose materials
• Check for and repair any uneven areas or damages
• For porous surfaces, apply Dunlop Multi-Purpose Primer:
  • Dilute 1:1 with water
  • Improve adhesion
  • Ensure even coverage
• For plaster backgrounds, apply two neat coats of Dunlop Multi Purpose Primer

Additional preparation tips:

• Work within a temperature range of 5°C to 25°C
• Avoid tiling in damp conditions
• Verify surface levelness
• Properly prime to ensure the best possible bond

The CX-24 is suitable for:

• Ceramic tiles up to 300mm x 300mm
• Glazed ceramic tiles
• Unglazed ceramic tiles
• Ceramic mosaics

Limitations and important notes:

• Not recommended for porcelain tiles without Flexible Additive
• Avoid using with:
  • Translucent or water-sensitive natural stones
  • Fully vitrified tiles

For more challenging tile types or special applications, consider alternative Dunlop adhesive solutions with enhanced flexibility.

CX-24 Essential Tile Adhesive provides a coverage of approximately 2kg per square metre for drywall areas and 3.5kg per square metre for floors, exterior and wet areas. The recommended bed thickness is 3-6mm with the option to use up to 12mm in limited, isolated areas. After application, wait 24 hours before grouting, making it suitable for projects where a longer setting time is acceptable. Always add an extra 10% to your calculated quantity to allow for cuts, waste and potential errors. The extended setting time allows for more accurate tile placement and ensures a strong bond prior to grouting.